在现场机械设备维修中,经常遇到滚动轴承与轴配合部位的轴颈被磨损;减速器的进出端漏油。轮与轴装卸时,采用加垫板和人工锤击处理,由于各使用单位的情况不同,处理方法也不尽相同,但要求达到的目的相同。现将处理上述问题的方法整理如下。1轴与滚动轴承部位的磨损处理方法轴与滚 Maintenance of machinery and equipment at the scene, often encounter rolling bearings and shafts with parts of the journal is worn; reducer inlet and outlet leakage. Wheels and shafts handling, the use of padded and manual hammering treatment, due to the use of different units, the handling methods are not the same, but the same purpose to achieve the same. Now deal with the above problems are summarized below. 1 Shaft and rolling bearing parts of the wear and tear treatment methods shaft and roll