近年来,我厂应用直线式感应同步器数显装置于T_(68)镗床和φ110波兰镗床上,均取得成功,收到明显效果,很受车间的欢迎和重视。这种在普通镗床上装加两座标数显装置,便可作为简易座标镗床,非常实用。它不仅节省大量工装,缩短加工周期,而且由于普通镗床本身刚性好,可进行粗、精加工,比精密座标镗床效率高,成本低。它兼有精度和效率两个方面 In recent years, our factory has applied the linear induction synchronizer digital display device to the T_ (68) boring machine and the φ110 Poland boring machine, all achieved the success, and received the obvious effect, which is very welcomed and valued by the workshop. This common boring machine with two standard digital display device, can be used as a simple jig boring machine, very practical. It not only saves a lot of tooling, shorten the processing cycle, but also because of ordinary boring machine itself is good, can be rough, finishing, precision boring machine than the high efficiency, low cost. It combines both accuracy and efficiency