【摘 要】
：
The sliding wear property of high-carbon nanostructured bainitic bearing steel with the equal initial hardness and different microstructures was investigated,and the reasons for the difference of wear resistance between the cementite-bearing(CB)and cement
【机 构】
：
State Key Laboratory of Metastable Materials Science and Technology,Yanshan University,Qinhuangdao 0
论文部分内容阅读
The sliding wear property of high-carbon nanostructured bainitic bearing steel with the equal initial hardness and different microstructures was investigated,and the reasons for the difference of wear resistance between the cementite-bearing(CB)and cementite-free(CF)specimens were analyzed.The results show that CF specimens have lower mass loss and surface roughness and shallower wear depth than CB specimens during wear process.Compared with CB specimen,CF specimen presents superior wear resistance.This is due to two reasons:(1)a lot of retained austenite in CF specimen is easy to produce TRIP effect and be transformed into martensite during wear process,which notably increased the surface hardness of worn specimen;(2)there is a nondestructive oxide layer in the surface of cementite-free worn specimen,which can protect the surface of worn specimen from destruction.Under the combined effect of retained austenite and oxide layer,the loss of matrix is reduced.Thus,CF specimen exhibits high wear resistance.It reveals that the wear mechanism of high-carbon nanostructured bainitic bearing steel with different microstructures can provide a reference for improving the wear resistance in high-carbon nanostructured bainitic bearing steel in future.
其他文献
The hot deformation behavior of a low-alloy offshore steel was systematically investigated within the temperature range of 850-1150℃and strain rate range of 0.01-10 s-1,via hot compression testing.The hot working equation,grain size model and recrystalliz
在短视频大众化发展趋势下,视频博客日益成为外卖骑手展示自我、拓展社交、寻找认同的重要方式.以哔哩哔哩网站上的外卖骑手up主为研究对象,运用社会网络分析法对其进行网络连接关系分析.研究发现,up主间形成了一定的网络社群,社群具有“大分散、小集中”的特征,网络连接关系结构层级化,但该关系网络存在一定形式的断裂与反连接,骑手们要想建立更为密切的共享社区,还需要采取进一步的行动.
利用SEM、TEM、XRD、EPMA等手段,研究了水冷、空冷和炉冷对奥氏体基FeMnAlC钢微观组织和力学性能的影响.研究结果表明,3种冷却工艺都获得了以奥氏体为基体的微观组织,均含有大量孪晶,随冷却速度的降低,沿晶界析出的铁素体和κ碳化物逐渐增多,微观结构呈现出从以位错为主到调制结构再到矩形畴界的转变过程,组织演变受合金元素的配分行为控制.与水冷样品相比,κ碳化物的析出导致炉冷和空冷样品的强度提升约200 MPa,铁素体和κ碳化物的晶界析出行为导致冲击吸收能量降低约100 J.
Based on the thermal simulation method,a systematical analysis was conducted on the effect of welding peak temperature and the cooling time that takes place from 800 to 500℃on microstructure,precipitates,substructure and microhardness of the reheated coar
Optimization of mathematical model of flow field in slab continuous casting mold was performed by means of industrial measurement and mathematical modeling.The rod deflection method was used to quantitatively measure the velocities near the mold surface a
In order to improve the production efficiency of electroslag remelting process and the solidification quality of electroslag ingot,a novel electroslag furnace with electromagnetic stirring was designed and the effects of external magnetic field and differ
Based on the free volume theory,lattice model,the Scatchard-Hildebrand theory,novel expressions of configuration partition function and excessive Gibbs free energy and component activity coefficients of solid solutions were developed using configuration p
To reduce internal residual stress and homogenize micro-property of hot-rolled ferrite steel,the cold compression deformation method with small reduction rate has been performed in the hot-rolled samples,and X-ray diffraction and nanoindentation test have
The reactions between CO2 gas and liquid Fe-C alloy with different initial carbon concentrations at 1873 K were investigated using experimental results,thermodynamic equilibrium,and kinetic analysis.The average CO2 conversion is greater than 80％when the c