论文部分内容阅读
本文是《伪均质固液两相流水击的数值模拟》的第二篇。在本文中，根据固液两相流水击实验，对前一篇论文中建立的伪均质固液两相流水击数学模型进行了验证，并对目前工程计算中采用的单相流修正模型进行了验证。计算结果与实验结果的对比表明，两相流模型的计算值与实测值符合较好，而单相流修正模型的计算结果误差较大。因此新建的伪均质固液两相流水击模型可以用于工程计算。
This article is the second of “Numerical simulation of water hammer of pseudo-homogeneous solid-liquid two-phase flow”. In this paper, according to the water-hammer experiment of solid-liquid two-phase flow, the mathematical model of water hammer of pseudo-homogeneous solid-liquid two-phase flow established in the previous paper is validated and the single-phase flow correction model Verified. The comparison between the calculated and experimental results shows that the calculated value of the two-phase flow model is in good agreement with the measured value, while the error of the single-phase flow correction model is relatively large. Therefore, the new pseudo-homogeneous solid-liquid two-phase water hammer model can be used for engineering calculation.