论文部分内容阅读
我厂生产是采用轮窑焙烧自然干燥的生产工艺,在运干、湿砖坯的过程中、需要大批劳力,而且劳动强度大,特别在农忙季节和雨后生产之间,缺少劳力带来的阻力困挠着企业,造成砖机不能正常出坯,轮窑不能正常运转.我厂针对这一问题,采取了人力运砖坯改为机械转运的措施,较好地解决砖瓦生产和轮窑砖坯人窑难的问题.例如2台40型砖机日生产20万块,运湿坯每2班远近平均需52人,但是计算运坯总重量劳平均11500kg,轮窑运干坯入窑两部火共需32人,8万砖坯计算劳平均6536kg.上述都需要强劳力.“我厂基于从砖机人力运湿坯改为12型手扶拖拉机,只需4~6人,轮窑运干坯改为“神牛25”,每班只需1人3小时完成任务,时间短,工效高,取得运干、湿砖坯四季无阻,节约大批劳力,降低
Our factory production is a production process that adopts wheel kiln roasting and natural drying. During the process of transporting dry and wet bricks, a large amount of labor is required, and the labor intensity is high, especially between the busy season and post-rain production. Trapped by the enterprise, the bricks cannot be ejected normally, and the wheel kiln cannot work normally. Our factory has taken measures from the manpower brick blank to mechanical transport to solve the problem, and better solved the brick production and wheel kiln bricks. The problem of kiln problems. For example, 2 sets of 40 brick machines produce 200,000 pieces a day, and wet batches require an average of 52 people for every 2 shifts. However, the average weight of the billets is calculated to be 11,500 kg. The kiln transports dry billets into the kiln. A total of 32 people are needed, and 80,000 bricks calculate an average of 6536 kg of labor. All of these require a lot of labor. "Our factory is based on the manual wet tractor from a brick machine to a 12-type walking tractor. It only takes 4 to 6 people to transport the dry kiln. Changed to “Shen Niu 25”. Only one person per class completes the task within 3 hours. The time is short, the work efficiency is high, and the transport and wet bricks are unimpeded in the four seasons, saving a lot of labor and reducing