论文部分内容阅读
随着工程质量的要求不断提高,水暖工程的有关尺寸也要统一化,我公司施工中主要采用了以下几个统一尺寸。1.水暖管离墙距离:标准图规定给水、热水、采暖管(DN15~32)中心起距墙表面50mm为宜,DN40以上取60mm为宜。因为距离过近,立管阀门安设不便,有时需破坏墙面才能将阀门装上;距离过远则影响美观,且占用空间。我公司均采用管外皮距墙表面30mm;而对于排水管,由于打口所需,采用承口距墙表面50mm。2.暖气片离地高度:标准图规定100~200mm。为求统一,我们规定阀门(立
With the continuous improvement of the project quality requirements, the relevant dimensions of the plumbing project must also be unified. Our company has adopted the following unified dimensions in its construction. 1. Distance from Plumbing Pipe to Wall: The standard drawing stipulates that the water supply, hot water, and heating pipes (DN15~32) should be 50mm from the surface of the wall, and DN40 should be taken as 60mm. Because the distance is too close, the position of the riser valve is inconvenient, and sometimes it is necessary to damage the wall surface to install the valve; the distance is too far to affect the appearance and occupy space. Our company adopts pipe skin 30mm away from the wall surface; for the drainpipe, due to the need for opening, the socket is 50mm away from the wall surface. 2. Radiator height from the ground: The standard map provides 100 ~ 200mm. For the sake of unity, we specify the valve