论文部分内容阅读
本文介绍的是一套由专用机床制造商提供的生产系统,用于加工长达40ft的零件,该工件必须通过车削中心的加工区,然后从机床的另一端出来。棒材进给装置通常被认为是一种棒料储备装置(图1),以满足很多零件连续加工的需要。工料随着棒材的进给而不断地向前推进,车床将棒料切割成段(也就是切割成一个一个的工件),然后按照加工周期陆续地完成每一个工件的加工。可以将棒材进给想象成是一种允许让车床加工很长的一个单一零件的进给装置,这个零件的长度
This article describes a production system provided by a dedicated machine tool builder for the machining of parts up to 40 ft in diameter. The work piece must pass through the machining area of the turning center and out of the other end of the machine. Bar feeder is usually considered a bar stocking device (Figure 1), to meet the needs of many parts of the continuous processing. As the bar progresses along with the bar feed, the lathe cuts the bar stock into pieces (that is, cuts into individual pieces), and then completes the machining of each part according to the machining cycle. The feed of bars can be thought of as a feed device that allows a lathe to machine a very long single piece, the length of which