【摘 要】
:
The Fe3Si based coating was produced on the Fe-lSi steel surface by a pulsed Nd:YAG (yttrium aluminum garnet) laser. Its phase constitution and microstructure w
【机 构】
:
Key Laboratory for Anisotropy and Texture of Materials of the Ministry of Education of China,School
论文部分内容阅读
The Fe3Si based coating was produced on the Fe-lSi steel surface by a pulsed Nd:YAG (yttrium aluminum garnet) laser. Its phase constitution and microstructure were characterized by using X-ray diffraction (XRD), optical microscope (OM), and field emission scanning electron microscope (FESEM) with associated energy dispersive spectroscopy (EDS) and transmission electron microscopy (TEM). The hyperfine structure of the coating was studied by Mossbauer spectra (MS) and the magnetic property was also measured at room temperature by a vibrating sample magnetometer (VSM). The obtained coating is pore and crack-free with dense microstructure and high Si content. The metallurgical bonding between the coating and the substrate was realized. The micro-structure of the coating is typical fine dendrites. The major phase was confirmed by XRD and TEM to be the ordering DO3 structured Fe3Si phase. In addition, there were smaller amounts of the Fe5Si3 phase and the T-Fe phase in the coating. Compared with the sub-strate, the laser cladding coating has a lower saturation magnetization and a higher coercive force. The poor magnetic property might be because of rapid solidification microstructure and phase constitution in the coating.
其他文献
Eleetroless Ni-Cu-P deposits were deposited on the Si substrate in a basic hypophosphite-type plating bath.The effects ofpH value and the metal source compositi
A new process, NOx reduction with recycling flue gas and modifying coke breeze, was proposed. The effects of modified coke breeze and recycled flue gas on NOx r
Nanostructured Bi2Se3 and Sn0.5-Bi2Se3 were successfully synthesized by hydrothermal coreduction from SnCl2H2O and the oxides of Bi and Se. The products were ch
In conventional shared risk link group (SRLG)-diverse path selection (CSPS) algorithm in survivable GMPLS networks, SRLG is taken into account when selecting th
Adaptive broadband beamforming is a key issue in array applications. The adaptive broadband beamformer with tapped delay line (TDL) structure for nonuniform lin
The DBSA-PANI-Fe composite powder with 50wt% of Fe nanoparticles was prepared by mechanically mixing the DBSA-doped polyaniline powder and Fe nanoparticles. The
Microstructures and mechanical properties of the 25Mn twinning induced plasticity (TWIP) steel at different annealing temperatures were investigated.The results
Al-Si metal matrix composites (MMCs) reinforced with 20 vol.% alumina-silicate shot fibers (Al2O3-SiO2(sf)) were fabricated by an infiltra-tion squeeze method.
The effect of grinding on the chemical and physical properties of rice husk ash was studied. Four rice husk ashes with different finenesses,i.e. coarse original
文章用有限元法对筒仓进行了动态压力数值模拟,得到了沿仓壁和漏斗壁动态压力数据,并将模拟结果与测试数据、规范、Janssen公式和微力学离散元模拟结果进行了对比分析,表明有