论文部分内容阅读
新型的GSTM-3232自行式剪型高空作业车,满足了具有挑战性工作场所的工作条件,可以把至227kg的载荷最高升到工作高度11.75m,只需2.44m长和0.81m宽的占地面积。并可轻易通过标准的门道。带两个前轮驱动和转向半径为零、0.91m的延伸板可以允许工作人员和工具利用最大的平台空间,行使速度为3.5km/h,爬坡能力为25%。具有标准的吉尼自动平衡液压支腿系统,可以在斜坡上进行5度侧面至侧面的水平调整和3度前面至后面的水平调整,激光定位选项帮助操作员在展开支腿前定位设备。这样可以保证设备在上升到工作高度前的稳定性。四轮制动系统组合了双后轮弹簧、液压释放刹车,使得设备最大响应。全封闭在钢制外罩里的刹车,能防止工作场所的碎片和机器的磨损以延长使用寿命。电控系统中,向前成角度的霍尔效应操纵杆使用舒适并且提供了精确的控制。在平台控制盒上的LED窗口显示了节省时间的信息,包括电瓶电量指示器,随车诊断系统,调速和配置设定等。电子平台控制盒可以和平台延伸板一起移动,给操作员一个清晰和一致的视线。
The new GSTM-3232 Self-propelled Scissor Lift fulfills challenging working conditions and raises the load up to 227kg up to a working height of 11.75m, occupying only 2.44m long and 0.81m wide area. And easily pass the standard doorway. With two front-wheel drive and zero-radius, 0.91m extension plates allow staff and tools to take advantage of maximum platform space at 3.5km / h at 25% rampability. Equipped with the standard Gini self-balancing hydraulic leg system for 5 ° side-to-side and 3 ° front-to-back leveling on the slopes, the laser positioning option helps the operator position the unit before deploying the leg. This guarantees the stability of the equipment before it is raised to working height. The four-wheel brake system incorporates a dual rear wheel spring that hydraulically releases the brakes to maximize equipment response. Brakes fully enclosed in steel enclosures prevent workplace debris and machine wear for extended service life. In the electronic control system, the forward angled Hall effect joystick is comfortable to use and provides precise control. The LED window on the platform control box shows time-saving information, including battery level indicator, on-board diagnostic system, speed control and configuration settings. The electronic platform control box can be moved with the platform extension to give the operator a clear and consistent view.