本装置的目的在于消除从浇铸炉出来的钢水流量不稳定,以适应铸轧一定宽度与厚度的带钢。炉内钢水通过立管3和水准罐4按需要流量连续地进入铸轧机1。因为将压缩气体引入密封的炉2内,从而使液面下降。程序发送器6把数字式进给修正量加到钢水输送量上。通过管道7给气动调节器8一个额定信号。气动调节器8将输送量压力与管道9 The purpose of this device is to eliminate the instability of the flow rate of molten steel coming out of the casting furnace in order to adapt to the strip casting of a certain width and thickness. Furnace molten steel through the riser 3 and the level of the tank 4 into the continuous casting mill 1 at the required flow rate. As the compressed gas is introduced into the sealed furnace 2, the liquid level is lowered. The program transmitter 6 adds the digital feed correction amount to the molten steel delivery amount. A nominal signal is given to the pneumatic regulator 8 via the line 7. Pneumatic regulator 8 will deliver pressure to line 9