论文部分内容阅读
这台专門加工导軌曲綫油槽的工具,是我厂的技术革新項目。M115磨床导軌面上有三条曲綫油槽,长1500毫米,深2.5毫米。这油槽原来是用人工凿出来的,要一天才能完成,現在采用刨曲綫油槽工具,只要一小时,提高效率8～10倍,且减輕劳动强度,提高油槽光洁度,槽的深淺一样。这只工具經过半年来的試驗,效果良好,現介紹于下。一、工具結构三只刀架和主要傳动件装在龙門刨床的横梁13的底板12上(图1)。在机床的工作台上装有2米长的齿条1,齿条与工具的傳动齿輪2啮合。当机床工作台移动时,齿条带动齿輪2转动并通
This special tool for machining groove curve tank is my factory’s technological innovation projects. M115 grinder rail surface has three curved tank, 1500 mm long, 2.5 mm deep. The tank was originally manually chisel out, to a day to complete, and now the use of shaver curve tank tool, as long as one hour to improve efficiency of 8 to 10 times, and reduce labor intensity, improve tank finish, the same depth of the tank. This tool after six months of testing, the effect is good, are introduced below. First, the tool structure Three knife frame and the main transmission installed in the planer 13 of the beam 12 on the floor 12 (Figure 1). A 2-meter-long rack 1 is mounted on the work table of the machine tool and meshed with the transmission gear 2 of the tool. When the machine table moves, the rack drive gear 2 and turn