论文部分内容阅读
故障一:开机后出现F-22故障代码,查维修手册可知故障在NO331MC板的振荡电路部分。检修:将NO331MC板拆下来,给该板独立接上+5V工作电源,如图1所示,用示波器检测HIC1的7、8脚是否有1.3MHz~1.4MHz的脉冲波形,如果有,则正常。结?
Fault 1: After the boot, there will be an F-22 fault code. Check the maintenance manual to find out the fault in the oscillation circuit of the NO331MC board. Maintenance: Remove the NO331MC board and connect the board to the +5V power supply. As shown in Figure 1, check whether the pulse waveforms of the 7th and 8th pins of the HIC1 have a pulse waveform of 1.3MHz to 1.4MHz. If so, then normal. Knot?