论文部分内容阅读
Influence of Polycarboxylic-type Admixture on the Strength of Autoclaved Aerated Concrete
【机 构】
：
Jiangsu Key Laboratory for Construction Materials, Southeast University, Nanjing 211189, China;Inter
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2016年6期
其他文献
We developed poly lactic-co-glycolic acid (PLGA) microspheres loaded with cefquinome and tested their effectiveness in a mouse model.The microspheres were prepared by optimizing several key parameters such as PLGA molecular weight,drug/polymer ratio,inter
We analyzed the influence of sodium polyphosphate (STPP) on the performances of recycled gypsum (RG). This analysis was performed with two different ways of STPP addition: One was that the STPP was added into Plaster of Paris (POP), then recycled plaster
By means of29Si and27Al magic angle spinning nuclear magnetic resonance (MAS NMR) combined with deconvolution technique, X-ray diffraction (XRD), scanning electron microscopy (SEM) as well as energy dispersive X-ray system(EDX), the effect of 5 wt% corros
We developed a ifxation method and evaluate bone regrowth in the cavities of af4 mm× 8 mm titanium (Ti) tube through porous hydroxyapatite (HAP)/β-tricalcium phosphate (β-TCP) composite filling (group A), chitosan/calcium phosphate composite filling (grou
The properties of the carbonated brick made of steel slag-slaked lime mixture such as strength, drying shrinkage, water absorption and soundness were mainly investigated. The experimental results indicate that, after carbonation, the strength of the brick
Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of Friction Stir Weld
7XXX series aluminium alloys generally present low weldability by fusion welding methods because of the sensitivity to weld solidification cracking, vaporization of strengthening alloys and other defects in the fusion zone. Friction stir welding (FSW) can
Self-deformation cracking is the cracking caused by thermal deformation, autogenous volume deformation or shrinkage deformation. In this paper, an extended finite element calculation method was deduced for concrete crack propagation under a constant hydra
Construction of Amperometric Glucose Biosensor based onIn-situ Fabricated Hierarchical Meso-macropor
Gold nanoparticles (GNPs) modified hierarchical meso-macroporous (HMMP) SiO2 layer on the surface of Au iflm electrode was developed as a novel enzyme immobilization matrix for biosensors construction. HMMP SiO2-Au bilayer film electrodes were in-situ fab