Proton linac-based therapy facility for ultra-high dose rate (FLASH) treatment

来源 :核技术(英文版) | 被引量 : 0次 | 上传用户:shuibizi
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
As an advanced treatment method in the past five years,ultra-high dose rate (FLASH) radiotherapy as a breakthrough and milestone in radiotherapy development has been verified to be much less harmful to healthy tissues in different experiments.FLASH treatments require an instantaneous dose rate as high as hundreds of grays per second to complete the treatment in less than 100 ms.Current proton therapy facilities with the spread-out of the Bragg peak formed by different energy layers,to our knowledge,cannot easily achieve an adequate dose rate for FLASH treatments because the energy layer switch or gantry rotation of current facilities requires a few seconds,which is relatively long.A new design for a therapy facility based on a proton linear accelerator (linac) for FLASH treatment is proposed herein.It is designed under two criteria: no mechanical motion and no magnetic field variation.The new therapy facility can achieve an ultrahigh dose rate of up to 300 Gy/s;however,it delivers an instantaneous dose of 30 Gy within 100 ms to complete a typical FLASH treatment.The design includes a compact proton linac with permanent magnets,a fast beam kicker in both azimuth and elevation angles,a fixed gantry with a static superconducting coil to steer proton bunches with all energy,a fast beam scanner using radio-frequency (RF) deflectors,and a fast low-level RF system.All relevant principles and conceptual proposals are presented herein.
其他文献
短舱泄压系统是短舱内部高压引气管路发生破裂或泄漏后,保证短舱结构不被破坏,发动机仍能安全工作的重要保障,因此,短舱泄压过程的研究对保证飞机安全至关重要。本文主要介绍
救生伞作为飞行员生命保障的关键装备,在其研制时需要进行大量的边界工况空投试验,而救生伞高速空投试验的开伞载荷数据不易准确获取,从而影响救生伞性能的真实评价。本文通
兴趣是最好的老师,确实如此,要提高学生的学习效率,首先要从激发学生的学习兴趣入手。物理是一门很有趣的学科,同时也是一门很有用的学科。教师在带领学生进入物理学习前,应
期刊
鸡西矿业集团公司张辰煤矿西三采区3
期刊
A method based on the cross-sectional relationship between 10B(n,α)7Li and 1H(n,γ)2H was proposed to detect and reconstruct the three-dimensional boron concen
摘要:航空发动机结构重量直接影响其工作效率与服役成本。本文以发动机宽弦风扇叶片为研究對象,基于拓扑优化技术给出了获得宽弦风扇叶片轻量化启发式设计的结构优化设计方法。研究中考虑了离心力工况与鸟撞工况。由于鸟撞工况具有随机性,本文采用加权求和的方式实现了不同位置鸟撞工况下风扇结构性能的统一评价和设计,有效降低了优化问题的复杂性。首先以结构的最小柔顺性为目标函数,以设计域内单元人工密度为设计变量,以设计
为分析斜撞击下撞击角度对6061-T651铝合金板失效特性的影响,首先用一级轻气炮发射半球形头弹正撞击铝合金靶板,得到试验数据。其次根据试验工况建立弹靶模型并验证模型的有
气膜冷却是在涡轮叶片的表面轮廓上设计大量孔径0.1~0.8mm、孔深3mm以上的微小通孔,通过微小孔内对流,在部件表面形成薄层冷气膜,以达到隔离高温燃气流保护部件的目的。气膜
从小学阶段的教学工作特点出发,知识体系之间的界限并不明显,数学作为一切学科的基础,应该由小学教师群体广泛而精通地掌握.根据我国新课程改革要求的文件提出,在课程实施中,
现代战争对军用航空器的雷达隐身提出了极高的要求,除外形设计外,雷达吸波涂层材料是实现作战武器系统隐身的重要措施之一。作为新兴的复合损耗型吸波材料,金属有机框架(MOF)