非定常尾迹耗散过程无粘有粘数值模拟的比较

来源 :工程热物理学报 | 被引量 : 0次 | 上传用户:Ivy1234
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
1前言目前关于透平机械的设计方法大多数都是基于定常流动的.然而透平机械内的流动本质上是非定常的.如果能够定量地考虑非定常流动的影响来进行设计,将会使透平机械的性能进一步提高.在多级轴流压气机中,与叶片相对运动有关的两种主要来源是叶片排间的势流相互干扰?..“,”The unsteady flow field resulted from the interaction between upstream wakes and stator is simulated by an inviscid and a viscous numerical method respectively. Two-dimensional unsteady non-reflecting boundary conditions are implemented at the inlet and outlet of the computational domain to remove the spurious numerical reflection. High-order fluctuations of unsteady lift due to the influence of viscosity are perceived from the comparison between the inviscid and the cooresponding viscous results.The mechanism of wake unsteady decay process and unsteady loss is discussed and manifested through the comparison of the results under several different conditions.
其他文献
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.
该文采用一种分区算法求解二维NAVIER-STOKES方程,对叶轮机械多级叶片排内的非定常流场干涉进行数值模拟.在探讨分区计算对于复杂通道内流场和动静叶列非定常干涉作用数值计
在完整地分析热丝工作关系式的基础上,设计了一种用于周期性动态温度测量的单热膜吸气探针,进行了稳态校准实验和频响检测实验,得到了与理论分析良好一致的探针输出对温度和
三维激光多普勒测速技术测量了扩压叶栅叶片和端壁相交的角区中的流动结构和紊流特性.实验结果表明,角区中端壁附面层和叶面附面层的堆积使得叶面附面层变厚;角区内存在较强
按普朗特边界展理论,将圆柱面上再附边界层流动表示成级数的形式,并根据实验所测圆柱表面上的压强分布导出再附边界层外边界上的流速分布,取有限项级数解的形式解出了圆柱表
The use of Navier-Stokes simulation in the daily design process of multistage compressor requires extremely large computer resources. A less expensive alternate
在用有能量补偿的闪烁型γ辐射剂量率仪测定陆地γ辐射剂量率D_γ时,需要从读数R中扣除对宇宙射线的响应。一般采用以下两种近似扣除方法:方法Ⅰ:D_(γ.1)=R-R_w(D_c/D_cw)方
该文提出了考虑过冷态超流氦传热中的He/Hell、GHe/Hel的二步相变传热模型,该模型与实验结果符合得很好.“,”A two step phase transition model is developed, in which th
IT IS NECESSARY TO ESTABLISH A SIMPLE AND ACCURATE MATHEMATICAL MODEL OF CAPILLARY TUBESFOR THE STUDY OF THE SYSTEM PERFORMANCE OF REFRIGERATION APPLIANCES EQUI