Removal of cadmium and zinc ions from aqueous solution by living Aspergillus niger

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:njacky_nan
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The potential of living Aspergillus niger to remove cadmium and zinc from aqueous solution was investigated. Effects of pH, initial concentration, contact time, temperature and agitation rate on the biosorption of Cd(Ⅱ) and Zn(Ⅱ) ions were studied. The optimum adsorption pH value for Cd(Ⅱ) and Zn(Ⅱ) were 4.0 and 6.0. The best temperature and agitation rate were in the range of 25-30 ℃ and 120 r/min for all metal ions. Under the optimal conditions, the maximum uptake capacities of Cd(Ⅱ) and Zn( Ⅱ ) ions are 15.50 mg/g and 23.70 mg/g at initial concentrations of 75 mg/L and 150 mg/L, respectively. Biosorption equilibrium is established within 24 h for cadmium and zinc ions. The adsorption data provide an excellent fit to Langmuir isotherm model. The results of the kinetic studies show that the rate of adsorption follows the pseudo-second order kinetics.
其他文献
The electrical and thermal performances of a simulated 60 kW Proton Exchange Membrane Fuel Cell (PEMFC) cogeneration system are first analyzed and then strategi
The semi-continuous seeded emulsion copolymerization of vinyl acetate and butyl acrylate was carried out with hydroxyethyl cellulose as a colloid stabilizer. Th
A new type of transferring structure for steel reinforced concrete (SRC) beams is used in high building. The pushover analysis method was used to study the fail
Reinforced concrete structural elements with box section are commonly used in the horizontal and vertical structure of bridges. The reinforced concrete structur
MgTiO3 precursor was mechanochemically synthesized by high-energy ball milling of MgO and TiO2. The sintering characteristic of the resulted MgTiO3 precursor wa
After a review of the tufting industrys development, and a brief introduction to available systems for producing patterned tufted carpets, the principle of ICN
Hydroxyapatite coatings were prepared on titanium substrate by electrochemical deposition technology, in which the electrolyte was 0.042 mol/L Ca(NO3)2 and 0.02
In this note, a robust adaptive control scheme is proposed for a class of nonlinear systems that have unknown multiplicative terms. Unlike previous results, exc
Electrochemical behaviors of laser-welded Ti-50.6%Ni(mole fraction) shape memory alloy and the base metal in 0.9% NaCl solution were investigated by electrochem
The Mg0.9Ti0.1Ni1-xPdx (x= 0,0.05, 0.1, 0.15) hydrogen storage electrode alloys were prepared by mechanical alloying. The main phases of the alloys were determi