论文部分内容阅读
一、硬件安装 1.检查清理 打开包装,拿出打印机,拆除打印机上所有不干胶保护封条,按照说明书检查随机所配附件后,再将机器装配起来。 2.信号线连接 在确保计算机电源已经关闭的情况下,将打印机数据线(并行电缆)的一端紧插在打印机的并行接口上,再将并行接口两侧的卡环扣进数据线的槽中,最后将打印机数据线的另一端连接在计算机的并行口上,扭紧螺丝。因为数据线两头完全不一样,不用担心插反。 3.电源线连接 将电源线的一端插入打印机的电源插孔中,电源电缆的另一端插入电源插座。
First, the hardware installation 1. Check the clean open the package, take out the printer, remove all the stickers on the printer to protect the seal, check the random accessories, and then the machine assembled. 2. Signal Cable Connection Ensure that the computer is powered off, plug the printer data cable (parallel cable) into the printer’s parallel port, and then snap the clips on both sides of the parallel port into the data cable , And finally connect the other end of the printer data cable to the parallel port of the computer, tighten the screws. Because the data line is completely different at both ends, do not worry about reverse. 3. Power Cord Connection Plug one end of the power cable into the printer’s power jack and the other end of the power cable into a power outlet.