二次受力下CFRP板加固钢梁静力试验和数值分析

来源 :建筑科学 | 被引量 : 0次 | 上传用户:w5423112
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
本文对二次受力下碳纤维增强复合材料(CFRP)加固钢梁进行了静力试验,研究了不同程度初始应力对加固钢梁抗弯承载力及界面应力的影响;然后用有限元分析软件ANSYS对加固结构进行了数值模拟,并将模拟结果与试验结果进行对比验证,两者较为吻合。试验及模拟分析结果表明:初始应力会降低加固钢梁的抗弯承载力,但是可以减小胶层中的界面应力,减缓CFRP板从钢梁上的剥离。初始应力对加固钢梁的抗弯承载力及剥离破坏形式有着重要影响,在实际加固工程中不应忽视。通过试验与数值分析对比得到了一个可以精确模拟二次受力下CFRP板加固钢梁静力性能的有限元模型。 In this paper, the CFRP-strengthened steel beams under static load are studied by static test. The effect of different initial stresses on the flexural strength and interfacial stress of the strengthened steel beams is studied. Then the finite element analysis software ANSYS Structure of the numerical simulation, and the simulation results and test results to verify the comparison between the two is more consistent. The experimental and simulation results show that the initial stress will reduce the flexural capacity of the strengthened steel beam, but reduce the interfacial stress in the rubber layer and slow the exfoliation of the CFRP sheet from the steel beam. The initial stress has an important influence on the flexural capacity and the form of peel-off failure of reinforced steel beams, which should not be neglected in the actual strengthening project. A finite element model that can accurately simulate the static behavior of steel beams strengthened by CFRP plate under secondary stress is obtained by comparing the experimental and numerical analysis.
其他文献
目的:探讨乳突-颞下迷路外径入路面神经减压术治疗颞骨骨折面瘫的临床疗效.方法:对2006-01-2008-04收治的26例外伤性面瘫患者行乳突-颞下迷路外径入路面神经减压术.面神经功
Discipline of wound healing, has been emerged with the demand of patients suffering from various wounds. A unique way different from traditional medical system,
目的 评价计算机辅助心肌造影(MCE)对顿抑心肌微灌注定量研究的可行性,探讨顿抑心肌的微灌注及局部功能与细胞凋亡的关系.方法 根据阻断和再灌注冠脉时间不同,将家兔分为三组
食品安全问题日益受到全社会的广泛关注,关于食品安全控制的研究也逐渐成为一个热点.文章以对湖北、广东等地的多种蔬菜供应链组织模式进行的大量详实的调查为基础,通过分析
Objective:To examine the level and variation of hypertension as a major health indicator among immigrant groups from Asia.Methods:Utilizing data from National H
为了在有限元软件ABAQUS中实现用纤维梁单元模拟钢筋混凝土构件,通过ABAQUS自身提供的隐式模块下的用户自定义子程序接口UMAT,在软件中开发了用于纤维梁单元的混凝土单轴本构
针对网架结构抗震设计,提出一种基于多目标进化算法NSGA-Ⅱ的抗震优化设计方法。建立以网架用钢量最小化和结构最大竖直位移最小化为目标的多目标优化模型;结合有限元动力计
为从理论上分析加肋方钢管混凝土轴压短柱管壁屈曲模态和相应的屈曲应力,应用能量法分别推导“单波”“双波”两种屈曲模态下加肋壁板的局部屈曲临界应力,分析加劲肋刚度对加
地下水在层状含水层中的渗流规律与均质含水层中有较大不同。通过模型试验研究了层状含水层的渗流规律,并与不同计算方法的结果进行对比分析。研究结果表明,弱透水层类型对层
对外方内圆复合钢管混凝土的纯弯力学性能进行了有限元模拟,计算结果得到试验结果的验证。在此基础上,进行了荷载-变形全过程受力分析和影响因素分析,基于钢管混凝土简单叠加