过去拆装气门锁片要两个人,我们自制了一种简易工具(如图),用此工具,一人就可顺利拆装气门锁片,省工省时。制作方法如下: 首先选一个内径24毫米的平垫片,锯掉一半,成半圆形;然后截一段长100至150毫米、直径为10毫米的圆钢做直杆,再截一段长60毫米,直径为12毫米的圆钢做手柄。按图示用电焊焊接牢固即可。拆卸气门锁片时,在被拆的气门大头(即气缸盖平面)垫上一 In the past to disassemble the valve lock to two people, we made a simple tool (pictured), with this tool, one can disassemble the valve lock film, saving time and labor. The production method is as follows: First, select a flat washer with an inner diameter of 24 mm, saw off the half, into a semicircle; then cut a length of 100 to 150 mm, a diameter of 10 mm bar made of straight bar, and then cut a length of 60 mm , A diameter of 12 mm round handle. According to the diagram with electric welding can be solid. When disassembling the valve locking piece, put one on the big valve head of the disassembled valve (the plane of cylinder head)