镍-铝-青铜合金表面类金刚石涂层的腐蚀性能和摩擦学行为

来源 :中国有色金属学报(英文版) | 被引量 : 0次 | 上传用户:belive
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
研究阴极电弧沉积制备的类金刚石(DLC)涂层对镍-铝-青铜(NAB)合金力学性能、摩擦学行为和腐蚀性能的影响.纳米硬度测试显示,与NAB合金相比,DLC涂层具有更大的硬度.销盘摩擦测试显示,摩擦因数由NAB合金的0.2降低为DLC涂层的0.13.动电位极化和电化学阻抗谱结果表明,在3.5%(质量分数)的NaCl溶液中,腐蚀电流密度由NAB合金的2.5μA/cm2降低到DLC涂层的0.14μA/cm2.此外,基体-电解质界面的电荷转移电阻由NAB合金的3.3 kΩ·cm2提高到DLC涂层的120.8 kΩ·cm2,表明DLC涂层能提高合金的耐腐蚀性能.“,”The effect of diamond-like carbon (DLC) coating (fabricated by cathodic arc deposition) on mechanical properties, tribological behavior and corrosion performance of the Ni-Al-bronze (NAB) alloy was investigated. Nano-hardness and pin-on-plate test showed that DLC coating had a greater hardness compared with NAB alloy. Besides, the decrease in friction coefficient from 0.2 for NAB substrate to 0.13 for the DLC-coated sample was observed. Potentiodynamic polarization and EIS results showed that the corrosion current density decreased from 2.5 μA/cm2 for bare NAB alloy to 0.14 μA/cm2 for DLC-coated sample in 3.5 wt.% NaCl solution. Moreover, the charge transfer resistance at the substrate-electrolyte interface increased from 3.3 kΩ·cm2 for NAB alloy to 120.8 kΩ·cm2 for DLC-coated alloy, which indicated an increase in corrosion resistance due to the DLC coating.
其他文献
会议
“国以民为本,民以食为天,食以安为先”,流传千年的古语质朴地表明了食品及食品安全的重要性.进入新时代,人民福祉的提高首先就要提高人民健康、保障人民生命安全.要实现这一
期刊
2004年是京城房地产发展迅速的一年,无论是住宅市场、写字楼市场还是商铺、商场市场,在各种房地产政策的消化中逐渐走向成熟,市场的承受能力逐渐得到增强,同时受更多的外资
制备体积分数分别为0、1.5%、3%、5%和10%B4C颗粒增强Mg金属基复合材料,研究其力学性能和磨损行为.在450℃和不同加载速率下,分别采用分离式霍普金森棒(SHB)、锻锤(DH)和Instron(