三维曲面柔性卷板成形技术是一种新颖的板材柔性成形技术。简单介绍了三维曲面柔性卷板成形技术,并以马鞍形件为例,采用通用的有限元程序建立了三维曲面柔性卷板成形过程的有限元模型。通过数值模拟的方法来研究同种材料、不同厚度的板材对其成形过程的影响,得出了在相同压下量时,随着板厚的增加,马鞍形件的成形效果越好的结论,并通过了实验验证。模拟结果对制定成形工艺,以及如何确定在一定参数下压制多少厚度的板材效果为最佳,具有一定的指导意义。 Three-dimensional curved flexible sheet forming technology is a novel sheet forming technology. A brief introduction to the three-dimensional curved flexible sheet forming technology is given. Taking the saddle as an example, the finite element model of the three-dimensional curved flexible sheet forming process is established by the common finite element program. Through the numerical simulation method to study the same material, different thickness of the sheet on the forming process, obtained at the same reduction, with the increase of thickness, saddle shape forming the better results, And passed the experimental verification. The result of the simulation is the best for setting the forming process and how to determine how much the thickness of the sheet is pressed under a certain parameter, which is of guiding significance.