这种运料机由底架4、活动支架1、小車2、頂板3、凸輪5、踏板6和护板7组成。在凸輪踏板操縱下,改变軌道的傾斜角度,运料小車就可以往返,把加热毛坯送到錘上,或把鍛件从鍛錘处送回爐旁。踏板由加热工人操縱,小車行至軌道末端,它上面的托料盘同顶板3相碰,翻轉約45°,将坯料翻落地上,完成运料任务。松开踏板,小車又返回爐旁。 This conveyor by the chassis 4, movable bracket 1, car 2, the top plate 3, the cam 5, the pedal 6 and the guard 7 components. In the cam pedal manipulation, change the inclination angle of the track, transport car can go back and forth, the heated blank sent to the hammer, or the forging from the forging hammer back to the furnace. The pedal is operated by the heating worker and the trolley runs to the end of the track. The tray above it collides with the top plate 3 and turns about 45 °, turning the billet onto the ground to complete the transportation task. Release the pedal and the car returns to the furnace.