论文部分内容阅读
近年来,液压滑模施工经推广普及,迅速发展,已成为现浇混凝土和钢筋混凝土结构的一种行之有效的快速施工方法。为进一步提高设计效果,保证工程质量,多快好省地完成冶金基建任务,在总结我部多年来滑模工程主要经验的基础上,部委托建筑研究院组织编审了《滑模施工工程设计技术规定》,现批准自即日起试行。希各单位将试行中的经验和意见,随时函告建筑研究院。该技术规定编号为冶基规101—77(试行),由冶金工业出版社出版,建筑研究院予以协助。
In recent years, hydraulic sliding mode construction has been popularized and rapidly developed, and it has become an effective and rapid construction method for cast-in-place concrete and reinforced concrete structures. In order to further improve the design effect, ensure the quality of the project, and quickly complete the metallurgical infrastructure construction task, the Ministry of Construction commissioned the Research Institute to compile and review the “Sliding Form Construction Engineering Design Technology” on the basis of summarizing the main experiences of the Ministry of Industry over the years. “Regulations” are now approved for trial implementation from today. Xi Ge units will inform the Institute of Construction at any time regarding the experiences and opinions in the trial. The technical regulation number is Metallurgical Standard 101-77 (Trial), which is published by the Metallurgical Industry Press and assisted by the Construction Institute.