在冲压生产中为了便于下道工序的冲压,借以提高生产率而采用了一些落料装置。本文介绍几种简易的落料方法。图1所示系压簧支承冲件,堆放冲件的平板随着冲件的增多而成比例下降。更换平板上的档料杆可以适应各种不同的冲件,档料杆也起导向作用。图2系重锤式料仓,在料仓下方取冲件。它适用于元形、方形等形状简单的冲件。图3所示的装置像弹簧称。冲件顺着滑槽落到料筒里,料 In stamping production in order to facilitate the next process of stamping, in order to improve productivity and the use of some blanking device. This article describes several simple blanking methods. As shown in Fig. 1, the compression spring supports the punch, and the slab stacking the punch decreases proportionally with the increase of the punch. Change the lever on the plate to adapt to a variety of different pieces of red, the file lever also plays a guiding role. Figure 2 Department of heavy hammer silo, take the hopper below the hopper. It applies to the simple shape of the element, square and other red pieces. The device shown in Figure 3 is like a spring. Punch along the chute fell into the barrel, expected