论文部分内容阅读
Nano-SiCP particles distribution and mechanical properties of Al-matrix composites prepared by stir
【机 构】
:
StateKeyLabofMaterialsProcessingandDie&,MouldTechnology
【出 处】
:
中国铸造:英文版
【发表日期】
:
2018年3期
【基金项目】
:
This work was financially supported by the National Natural Science Foundation of China (No. 51574129) and Technological Innovation Special Project of Hubei Province (No. 2017AAA110).
其他文献
A modal nonmonotonic logic is presented based on an experiential modal semantics on typicality and exception.The syntactic and semantics of modal nonmonotonic l
The break of PKCY is reduced to a break of the related equi-effect cryptosystem, and a method for obtaining the equi-effect secret key by solving matrix equatio
Modification and refinement effects of Sb and Sr on Mg17Al12 and Mg2Si phases in Mg-12Al-0.7Si alloy
The effects of Sb and Sr on the modification and refinement of Mg17Al12and Mg2Si phases in Mg-12Al-0.7Si alloy were investigated and compared. The microstructur
期刊
The electrode configuration determines the thermophysical field during the electroslag remelting(ESR) process and affects the final microstructure of the ingot.
High-quality solidification microstructure during directional solidification relies on precise temperature gradient control, so accurate calculation of the temp
Wet reclamation of waste sodium silicate-bonded sand produces much alkaline sewage and causes pollution. Recycling water glass from wet reclamation sewage of th
Based on the field measurements of the reflected radiation distribution on sunlit crown surface and crown structure, the analytical approximation model of path-scattering of light in a homogeneous lay
Characterization and kinetic modeling of secondary phases in squeeze cast Al alloy A380 by DSC therm
热分析上挤压扔的铝合金 A380 (SC A380 ) 不到 90 团结了 MPa 被执行到学习合金,微分扫描热量计(DSC ) 在被采用的微观结构发展。在 DSC 跑期间,加热并且冷却 1, 3, 10,和 20 评