【摘 要】
：
The formation and transformation of ettringite were studied by measuring the ion concentration in liquid phase and analyzing the composition in solid phase. The
【机 构】
：
Department of Building Materials
论文部分内容阅读
The formation and transformation of ettringite were studied by measuring the ion concentration in liquid phase and analyzing the composition in solid phase. The effects of C3A, gypsum, lime and C-S-H gel on ettringite formation and transformation were also investigated. The experimental results show that, when gypsum was presented in solid phase, the composition of liquid phase was in favor of ettringite formation. Ettringite formation consisted of three reactions including the formation of [Al(OH)6]3- octahedral, formation of Ca-Al polyhedra prism in which Ca and Al polyhedra arranged alternately, as well as entrance of SO42- into the channel of polyhedra. [Al(OH)6]3- formation, which was the slowest reaction, controlled ettringite formation. The concentration of AlO2- was a main factor that influenced ettringite formation. After gypsum in solid phase was consumed, [SO42-] decreased quickly and [AlO2-] increased, and it was possible that ettringite transformed into hydrated monsulfate calcium aluminate (be called M in short) in thermodymanics. The rate of transformation was controlled by diffusion of AlO2-.
其他文献
The effects of the process parameters of TIG (tungsten inset gas)-flux welding on the welds morphology,angular distortion, ferrite content and hot cracking in a
Magnetron-sputter deposition was used to produce Ti-48Al-8Cr-2Ag coating on a cast alloy substrate with the same composition. Hot corrosion was carried out in m
Eighteen reinforced concrete beams, including 16 beams strengthened with CFRP laminate at different levels of preload and 2 control beams, were tested to invest
High resolution magic angle spinning (MAS)-1 H nuclear magnetic resonance (NMR) spectroscopic-based metabonomic approach was applied to the investigation on the
我们学校正建新教学楼，爸爸在工地打工，每天上学放学，我都能看到他在干活。有时我喊一声，爸爸一边干活，一边应一声“上学去吧”，或者“放学啦，快回家吧，路上小心点儿”。
Optimal parameters for depositing Titanium nitride (TiN) thin films by DC reactive magnetron sputtering were determined. TiN thin films were deposited on Si (10
The aluminum coating layer was formed on a copper substrate with local strain region by using the electrodeposited method. It was found that the particle shape
巨影透寒意，团团烟雾香。神思活马列，妙手铸风樯。决胜千城外，操筹半盏旁。莫言窑洞小，天下可收藏。
Coaxial liquid-liquid flows were numerically studied in a nesting two-tube system. Calculations were carried out when various exit-lengths (meaning length diffe
A basic optimization principle of Artificial Neural Network-the Lagrange Programming Neural Network (LPNN) model for solving elastoplastic finite element proble