[目的]将秸秆固体成型燃料应用于烟叶生产中。[方法]以烤烟秸秆为原料,研究了不同生产工艺对烤烟秸秆固体成型燃料生产率和质量的影响。[结果]试验表明,采用含水率为20%,发酵时间为5 d的烤烟秸秆,筛网孔径为12 mm的工艺进行生产,所得秸秆固体成型燃料产品的质量较好,生产率较高。[结论]研究可为烤烟秸秆固体成型技术在实际生产中的推广应用提供合理的依据。 [Objective] The straw solid molding fuel was applied to tobacco production. [Method] With the flue-cured tobacco straw as raw material, the effects of different production techniques on the productivity and quality of flue-cured tobacco stover solid fuels were studied. [Result] The test showed that the production of straw solid fuels was better and the productivity was higher, using 20% ​​moisture content and 5 days fermentation time for flue-cured tobacco straw with a mesh size of 12 mm. [Conclusion] The study could provide a reasonable basis for popularization and application of flue-cured tobacco stalks solid forming technology in practical production.