工程施工中屋面波形瓦材与檩联结常规做法采用带弯钩螺栓加垫圈联结件,其构件制做困难,施工难度大,且由于负风荷作用使瓦材在联结点处易破坏。笔者在施工实践中采用一种简单易行的施工方法(见图1),既保护了质量,又方便了施工,做法如下:在波形瓦材上表面对准下檩条处设置通长6～10压筋,压筋与檩条采用普通铅丝绑扎,每瓦不少于3处绑扎点,铅丝穿瓦小孔设置在瓦峰 In the construction of roofing tile joints, the use of bolts and washer joints is a common practice in the construction of roofing tiles. The components are difficult to make and the construction is difficult. Because of the negative wind load, the tiles are easily damaged at the joints. The author uses a simple and easy construction method in the construction practice (see Figure 1), which not only protects the quality, but also facilitates the construction. The practice is as follows: Set the length of the raft on the upper surface of the tile material to be 6-10 Compressed tendons, pressed bars and purlins are bundled with common lead wire, no less than 3 lashing points per watt, and lead wire wearing holes are set in the tile roof