论文部分内容阅读
目的评价某生产企业客车及工业用漆新建项目职业病危害程度及防护效果,为卫生行政部门对该建设项目的职业卫生竣工验收提供科学的技术依据。方法采用检查表法、检测检验法,根据现场调查、职工职业健康检查情况,结合国家有关的职业卫生标准及其规范进行评价。结果经整改后,现场的职业病防护措施、管理措施、个人使用的职业病危害防护用品、职业健康监护、职业病危害因素检测等基本满足国家现行的法律法规和职业卫生标准。整改前粉尘CTWA最高值为4.13 mg/m3,整改后CTWA为0.11 mg/m3,达到标准要求。结论该建设项目职业病危害控制措施基本符合我国相关卫生法规和标准的要求,在职业卫生管理措施方面还需改进。
Objective To evaluate the degree of occupational hazards and the protective effect of the new construction project of passenger car and industrial paint in a manufacturing enterprise and provide scientific technical basis for the completion of the occupational health inspection of the construction project by the health administrative department. Methods The method of check list and test method were used to evaluate according to the field survey and the occupational health examination of the workers and the related national occupational health standards and their norms. Results After the rectification, the occupational disease prevention measures, management measures, personal use of occupational hazards protective equipment, occupational health monitoring and detection of occupational hazards in the field basically met the current national laws, regulations and occupational health standards. The highest value of CTWA for dust before rectification was 4.13 mg / m3 and the CTWA after the rectification was 0.11 mg / m3, meeting the standard requirements. Conclusion The control measures of occupational hazards in this project basically meet the requirements of relevant health laws and standards in China and need to be improved in terms of occupational health management measures.