论文部分内容阅读
像其他追求完美的爱好者一样,我对做金属颜色的模型没有信心,但凡用金属颜料涂装的大于1/48的飞机模型也从来没有给人好印象。大约一年以前,我看到一张B-58“盗贼”轰炸机模型的照片,照片上的飞机就是用铝箔纸蒙皮做的,于是我被征服了,决定小试锋芒。用铝箔纸做蒙皮有两种方法。较容易的方法就是用带不干胶的铝箔纸产品(图1);用普通的铝箔纸,然后自己上胶就比较困难了。它不仅花时间,而且爱出问题:用胶量要合适,胶上还不能粘尘土等等。从两者看来,后者更具有挑战性,但经过努力,完成的效果会是很不错的。我用普通的铝箔纸,后背刷上专用的胶,再运用文章中介绍的贴铝箔纸的技术,特别是贴弧形表面的技术,完成了这架P-38飞机模型的铝箔蒙皮。P-38飞机有多处是复杂的弧形面。不妨来试试。根据实机的要求,箔面材料应是二维或三维的,也就是说,它是立体的。普通的铝箔纸缺乏弹性,如果碰上尖利的形状和复杂的弧形面就容易被弄破或者起皱。Bare-Metal Foil的铝箔纸还算是有较好弹性的,适合变化的形状使用。面积较大、较平,把接缝处降至最少,这样的地方贴箔最为理想,可以用大块铝箔纸,例如:机翼和驾驶舱表面;变化较多的地方,要用小块铝箔纸,这样可以避免起皱。
Like other perfectionists, I have no confidence in the metal-colored models, but the airplane models painted with metallic pigments that are larger than 1/48 have never been impressed. About a year ago, I saw a picture of a model B-58 “thieves” bomber. The plane on the photo was made of aluminum foil and I was conquered. I decided to give a small test. There are two ways to make the skin with aluminum foil. The easiest way is to use self-adhesive aluminum foil products (Figure 1); use ordinary aluminum foil and glue yourself more difficult. It not only takes time, but also love problems: the amount of glue to be appropriate, the glue can not stick to dust and so on. The latter is more challenging from both perspectives, but with the hard work, the effect is very good. I finished the P-38 aircraft model aluminum foil with ordinary aluminum foil, a special glue on the back brush, and the technique of sticking aluminum foil paper, especially the technology of sticking arc surface. P-38 aircraft has many complex curved surface. May wish to try. According to the real machine requirements, the foil surface material should be two-dimensional or three-dimensional, that is, it is three-dimensional. Ordinary aluminum foil lack of elasticity, if you hit the sharp shape and complex curved surface is easily broken or wrinkled. Bare-Metal Foil aluminum foil is still fairly flexible, suitable for use in changing shapes. Larger, more flat, the seam at a minimum, the best foil in such places, you can use large pieces of aluminum foil, for example: the wing and the cockpit surface; change more places, to use small pieces of aluminum foil Paper, so wrinkles can be avoided.