目前,很多工厂使用的冲床效率很高,但都不能记数,一般靠工人清点零件。如果给冲床装上一个记数显示器,将给生产带来很大方便。解决的办法很简单,只要在冲床控制柜的空余地方,装上一个TD6-Ⅲ型六位电磁计数器及一通断开关1H,并在冲床机身适当地方,安装一行程开关LX3,接成如图示线路即可。 At present, the punching machine used in many factories is very efficient, but they can not count. Generally, the parts are counted by workers. If the punch fitted with a count display, will bring great convenience to the production. The solution is simple, as long as the punch in the control cabinet of the vacant place, fitted with a TD6-Ⅲ six-bit electromagnetic counter and a switch off 1H, and in the punch press the appropriate place, install a trip switch LX3, then as shown Show lines can be.