Peel test measurements and simulations of the interracial mechanical parameters for the Al/Epoxy/Al2O3 system are performed in the present investigation.A series of Al film thicknesses between 20 and 250 microns and three peel angles of 90,135 and 180 degrees are considered.Two types of epoxy adhesives axe adopted to obtain both strong and weak interface adhesions.A finite element model with cohesive zone elements is used to identify the interracial parameters and simulate the peel test process.By simulating and recording normal stress near the crack tip,the separation strength is obtained.Furthermore,the cohesive energy is identified by comparing the simulated steady-state peel force and the experimental result.It is found from the research that both the cohesive energy and the separation strength can be taken as the intrinsic interfacial parameters which are dependent on the thickness of the adhesive layer and independent of the film thickness and peel angle.