论文部分内容阅读
我公司一台1997年购进的林德叉车,其最大起升高度为14.96 m,可用于6层标准集装箱的堆高作业。由于利用率高,门架稳定性先天不足,经过几年的使用,门架出现了严重磨损、变形,使门架滚轮、滑轮的更换周期缩短;起升缸也由于门架变形而受力不均匀,导致其油封经常损坏、漏油,甚至造成活塞杆和导向套刮伤,严重地影响了叉车的工作可靠性,导致维修
A Linde forklift purchased by our company in 1997 has a maximum hoisting height of 14.96 m and can be used for stacking operations of 6-storey standard containers. Due to the high utilization rate, the stability of the gantry is inherently insufficient. After several years of use, the gantry has suffered serious wear and deformation, which shortens the replacement period of the gantry rollers and pulleys. The lifting cylinder also receives uneven force due to deformation of the gantry , Resulting in the oil seal is often damaged, oil spills, and even cause the piston rod and guide sleeve scratches, seriously affecting the reliability of the forklift, leading to maintenance