Multi-layer structure formation of relativistic electron beams in plasmas

来源 :等离子体科学和技术(英文版) | 被引量 : 0次 | 上传用户:wjief
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A two-dimensional electromagnetic particle-in-cell simulation model is proposed to study the density evolution and collective stopping of electron beams in background plasmas.We show here the formation of the multi-layer structure of the relativistic electron beam in the plasma due to the different betatron frequency from the beam front to the beam tail.Meanwhile,the nonuniformity of the longitudinal wakefield is the essential reason for the multi-layer structure formation in beam phase space.The influences of beam parameters(beam radius and transverse density profile)on the formation of the multi-layer structure and collective stopping in background plasmas are also considered.
其他文献
In this work,the anomalous transport driven by the ion temperature gradient instability is investigated in an anisotropic deuterium-tritium(D-T)plasma.The anisotropic factor α,defined as the ratio of perpendicular temperature to parallel temperature,is in
With the completion of Chinese BeiDou Navigation Satellite System (BDS), the world has begun to enjoy the Positioning, Navigation, and Timing (PNT) services of four Global Navigation Satellite Systems (GNSS). In order to improve the GNSS performance and e
The parametric decay process of a reversed shear Alfvén eigenmeode(RSAE)into a geodesic acoustic mode and a kinetic RSAE is investigated using nonlinear gyrokinetic theory.The excitation conditions mainly require the pump RSAE amplitude to exceed a certai
Globalization and informatization promote the evolution of urban spatial organiza-tion from a hierarchical structure mode to a network structure mode,forming a complex net-work system.This study considers the coupling of“space of flows”and“spaces of place
本文针对石墨烯增强复合材料悬臂板的气动颤振特性及振动控制问题开展了研究.利用Halpin-Tsai及混合率计算了石墨烯增强复合材料的等效材料参数,运用经典板理论、第二类压电方程和Hamilton原理得到了结构的运动控制方程.通过Rayleigh-Ritz法计算了石墨烯增强复合材料悬臂板的固有频率,探究了X-GPLs,U-GPLs和O-GPLs三种不同石墨烯分布类型以及不同石墨烯增强体质量分数对结构固有频率及无量纲临界颤振气动压力的影响.同时,通过加速度反馈控制和位移反馈控制对结构气动颤振的控制效果进行了分
本文考虑一类双边电容型微谐振器,提出在系统直流偏置电压上施加时滞速度反馈实施控制其复杂动力学行为.通过引入新变量解析表达同异宿轨道,在此基础上研究时滞反馈抑制该系统全局分岔的机理及其控制效果.发现时滞速度反馈对控制微结构吸合不稳定非常有效,却并不适用于控制混沌.本文研究在提高静电驱动微机械振动系统的动完整性上具有潜在的应用价值.
On December 18th-19th,2021,the First Asian Young Geographers Workshop was held online.Initiated by the Young Geographers Working Group of the Asian Geographical Asso-ciation(AGA-YGWG),the Workshop was jointly organized by AGA-YGWG,Young and Early Career G
期刊
大尺度薄膜结构平面天线由于轻质、超柔特点,其动力学性能参数较为复杂.为掌握其在轨结构动力学特性,基于温度-结构预应力导入方法建立了大型空间可展薄膜结构的动力学模型,分析了可展薄膜结构的动力学特性.通过建立的动力学模型,采用特征系统实现算法(ERA)对薄膜结构平面天线的模态参数在轨辨识进行研究.辨识结果与仿真分析结果对比表明,ERA方法可以有效辨识薄膜结构平面天线的低阶固有模态,为其工程化实施奠定了理论研究基础.
发动机静叶调节机构空间运动复杂,前人的研究并未涉及整机的动力学方程,运动副特性及驱动方式对调节机构动态性能的影响尚不明晰.本文通过将第一类拉格朗日方程与改进的接触模型和LuGre摩擦模型相结合,建立了考虑转动副间隙和摩擦特性的静叶调节机构动力学模型,并探究驱动方式对调节机构动态性能的影响.针对做空间转动的连杆的质量矩阵随时间不断变化这一问题,本文给出详细推导公式.将数值模拟结果与Adams仿真进行了比较,验证结果的正确性.通过对比匀速驱动、简谐驱动及梯形驱动方式表明,简谐驱动有助于减小运动过程中的阻滞力,
在主动隔振系统中,执行机构输出的主动控制力与系统隔振性能密切联系.为研究上述问题,本文通过建立优化目标函数对双层主动隔振系统进行优化来获得最优系统参数,分析优化前后双层主动隔振系统的隔振性能及主动控制力,验证优化方法的可性行.首先,从理论上研究了双层主动隔振系统在不同激励条件下的隔振性能,并分析了系统参数对主动控制力输出的影响.其次,建立综合性的优化目标评价系统的隔振性能,利用遗传算法优化目标函数.最后,利用模糊PID控制算法对双层主动隔振系统进行主动控制,对比优化前后的隔振性能及主动控制力,其结果表明: