【摘 要】
：
Liquid metals-such as lead (Pb) or lead-bismuth (PbBi) are used as reactor core coolants for accelerator driven systems (ADS) proposed for high-level radioactive waste transmutation. Compatibility of steels with liquid PbBi is a key problem because steels
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
Liquid metals-such as lead (Pb) or lead-bismuth (PbBi) are used as reactor core coolants for accelerator driven systems (ADS) proposed for high-level radioactive waste transmutation. Compatibility of steels with liquid PbBi is a key problem because steels are attacked by dissolution of the components in PbBi, so it has to form a stable coating on steel surface. There are many methods to prepare anti-corrosion coatings on steel, such as hot dipping, pack cementation, plasma spaying, and physical vapor deposition (PVD). Compared with other methods, the PVD method is easy to control the thickness of the coating and the obtained coatings are dense which is crucial to the anti-corrosion ability of the coatings. In this letter, PVD aluminum coatings are developed on the surface of T91 steel and different heat-treatment atmosphere is used to adjust the microstructure, aluminum content, and the phase of the coatings. It is found that the coatings have good adherence ability with steel. The aluminum content and the phase of the coating can be adjusted by the heat-treatment atmosphere. Corrosion tests are performed in oxygen-saturated liquid PbBi at 550 oC for 1 000 h, the phase and composition of the coating do not change drastically. All the results indicate that the PVD is a useful method to prepare coatings on the surface of steel used in liquid PbBi.
其他文献
针对PointNet模型只针对孤立点提取特征信息,而对邻域结构的信息提取能力不足的问题,提出基于图卷积网络的三维点云分类分割模型GraphPNet。首先将三维点云转换成无向图结构,利用该图结构得到点云的邻域信息,通过将邻域信息与单个点信息融合的方式提高分类与分割的准确率。在分类实验中,本文在ModelNet40数据集上进行训练与测试,并且与3D ShapeNets、VoxNet、PointNet模
A tunable luminescence from red to blue in Eu-doped mesoporous AlPO4 glass is achieved by adjusting the annealing temperature. With increasing annealing temperature, the increased Eu3 ions reduction changes the luminescence of the obtained glass. The abn
建立了基于电吸收调制器(EAM)的深度成像系统数值模型. 为定量描述时序误差对系统精度的影响推导了含尺度因子的测量误差公式, 分析了光调制器参数、系统噪声和时序误差对测量误差的影响. 结果表明, 无时序误差时, 测量值标准偏差与传感器阱中信号电子数的平方根成反比, 与阱中背景电子数和信号电子数之比的平方根成正比; 采用高调制速度和高消光比的EAM 可以提高系统精度; 随着时序偏移误差增加, 系统精度将迅速下降且难以通过增加传感器阱中信号电子数的方式提升; 如要求7 m 处单幅深度图像精度小于1 cm, 则
髙功率激光器的光学元件为了经受得住激光损坏，需要特大的尺寸，这导致总体装置变得不适当地大。由于空军对激光损坏研究的结果，高功率激光器可能最终在尺寸上会缩减，而且其功率输出会增大。
传统电子邮件业务使用明文方式传送电子邮件，一旦窃听者捕获电子邮件报文，通过对邮件报文进行分析就能获取邮件内容。尽管当前存在一些解决方案能够提高电子邮件的 安全性能，但只要窃听者拥有足够的计算能力，数据安全仍无法保证。针对上述问题，提出了一种基于量子信道通信的邮件传输系统。在邮件传输过程中， 将量子信道与传统信道结合使用，建立基于量子传输的SMTP协议和POP3协议。最终仿真结果表明，当邮件内容数据长度达到30比特时，量子邮件内容被窃取的可能性接近于0。 因此，与传统的电子邮件传输系统相比，量子通信邮件传输
A simple and effective approach is proposed to minimize the effect of unmodulated light and uneven intensity caused by the pixelated structure of the spatial light modulator in a holographic display. A more uniform image is produced by purposely shifting
使用涡旋光束代替高斯光束作为产生光源,研究了涡旋光束产生太赫兹波的过程。探究了具有不同拓扑荷数的涡旋光束在产生太赫兹波时的差异,相位奇点的位置对产生太赫兹波的影响,不同脉冲强度和激光波长下涡旋光束产生的太赫兹波能量、频谱和偏振的变化。结果表明,产生的太赫兹波强度会随涡旋光束拓扑荷数的变化而变化,并且与涡旋中心的位置密切相关。涡旋光束所产生的太赫兹波随脉冲强度和激光波长的变化趋势与高斯光束一致。高斯光束与涡旋光束产生的太赫兹波在频谱和偏振上的变化趋势一致。