A novel transmit scheme for OFDM systems with virtual subcarriers

来源 :High Technology Letters | 被引量 : 0次 | 上传用户:hj525761224
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Based on the double repetition structure in the frequency domain and the proper pulse shaping falterin the time domain,a novel transmit scheme for orthogonal frequency division multiplexing(OFDM)sys-tems with virtual subcarriers is proposed.Our proposed scheme with comb-type pilots can provide feasi-bility to reduce the channel estimation errors at the band edges with conventional inverse fast Fouriertransform(IFFT)-based channel estimator.Also this transmit scheme can provide additional diversitycompared to the conventional OFDM scheme.Meanwhile,the receiver schemes corresponding to the pro-posed transmit scheme are presented to obtain the advantages mentioned above.All these efficacies areconfirmed by simulations. Based on the double repetition structure in the frequency domain and the proper pulse shaping falter in the time domain, a novel transmit scheme for orthogonal frequency division multiplexing (OFDM) sys-tems with virtual subcarriers is proposed. Our proposed scheme with comb-type pilots can provide antennae-bility to reduce the channel estimation errors at the band edges with conventional inverse fast Fouriertransform (IFFT) -based channel estimator.Also this transmit scheme can provide additional diversitycompared to the conventional OFDM scheme.Meanwhile, the receiver schemes corresponding to the pro -posed transmit scheme are presented to obtain the advantages mentioned above. All these efficacies areconfirmed by simulations.
其他文献
异型阴极电解槽在采取焦粒焙烧启动工艺的生产实践中,解决了阴极凹凸表面铺焦技术瓶颈,以及分流技术的改进,通过有效控制焙烧温度和阳极电流分布,指出焙烧启动过程中的关键控制点
针对当前电解槽停槽顺序的无规则性,提出了建立自动停槽顺序的模型,主要从槽寿命、安全性和经济性几个方面给予相应的定义分,根据分值的情况,对所有电解槽进行排序,并且为该模型开
电解槽强化电流后,相关的技术条件要作相应调整,一些基础设施和设备要要跟进配套,例如,电解槽的焙烧启动所采用的软连接,是关系到电解槽焙烧安全的一件大事。本文对电流由160KA强
  本文采用逆王水预处理,HNO3+NaCl+KMnO4溶样体系对化探样品进行溶解后以分光光度法测定金;RSD为2.52%,范围内为0~50g/t。经验证,该方法操作简单快速、环境污染少、试剂成本比
本文系统阐述和分析了烧结法氧化铝生产中影响生料浆与熟料[N/R]之间差值的各因素,并对各种影响因素进行了具体量的分析,对生料浆[N/R]原控制工艺进行了优化和调整。
研究了用电解铝液直接熔铸高性能5182铸锭的制备工艺、组织和性能。结果表明:熔炼所用电解铝液比例控制在70%左右,其余部份使用重熔铝锭,装炉顺序按先固体料后电解铝液;采用无Na粉
会议
简要介绍了自行设计的大规格热顶结晶器的基本结构,以及用该结晶器在5t级熔铸机组上单块铸造400×1320规格5052铝合金扁锭的情况。结果表明采用热顶方式铸造大规格扁锭是可行
10月25日上午,“武警移动自组网关键技术研究”(项目负责人:程明定)和“移动存储介质安全管理系统”(项目负责人:妙全兴)项目技术鉴定会在学院召开。鉴定委员会由西北工业大
这张尘封了六十多年的照片,是2009年热映的谍战电影《风声》中女特工顾晓梦的原型、20世纪30年代左联女作家、后来接受组织任务打入汪伪特务机关的红 This dusty 60-year-ol
采用真空和氮气两种烧结方式烧结WC-TiC-Co硬质合金。借助扫描电镜、能谱仪、XRD对合金的烧结体表面、内部进行了观察与分析。结果表明,在氮气氛中烧结,合金中的Ti向表层迁移并