Grain Refinement During Directionally Solidifying GCr18Mo Steel at Low Pulling Speeds Under an Axial

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:sam008
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The present work investigates how axial static magnetic field affects the solidification structure and the solute distribution in directionally solidified GCrl8Mo steel.Experimental results show that grain refinement and the columnar to equiaxed transition is enhanced with the increases in the magnetic field intensity (B) and temperature gradient (G) and the decrease in the growth speed.This phenomenon is simultaneously accompanied by more uniformly distributed alloying elements.The corresponding numerical simulations verify a thermoelectric (TE) magnetic convection pattern in the mushy zone due to the interaction between the magnetic field and TE current.The TE magnetic convection in the liquid should be responsible for the motion of dendrite fragments.The TE magnetic force acting on the dendrite is one of the driving forces trigging fragmentation.
其他文献
In this study,Al matrix nanocomposites containing 1,2 and 4 wt% nano-boron nitride were fabricated by mechanical milling and hot extrusion.The mechanical properties of all extruded samples were evaluated.Also,the morphology and microstructure of the mille
The GH4169 superalloy with different content of δ-Ni3Nb phase was welded by tungsten inert gas welding.A detailed study of microstructure and hardness of heat-affected zone (HAZ) was performed in both as-welded and aged state.The results show that the pre
Experiments were carried out to investigate the corrosion behavior of epoxy-coated rebar (ECR) with pinhole defect (diameter in hundreds of microns) immersed in the uncarbonated/carbonated simulated pore solution (SPS) of seawater concrete.Corrosion behav
By using a novel surface modification technique named ultrasonic-electropulsing coupling rolling (UECR) process on an A1-Si casting alloy rod,the surface of material was smoothened significantly.Meanwhile,a strengthened layer with a gradient change in har
This paper reports TiC-(Ni-Cr) metal ceramic alloy (ratio of components 50∶50) with nanoscaled components formed in the surface layer and smoothly transformed into the initial inner structure throughout the material under pulsed electron irradiation of th
In this work,(1-x)CdO-xSnO2 nanocomposites (≤ 0.15) have been synthesized via hydrothermal route.The structural study reveals that CdO nanostructures possess crystalline phase and cubic structure.The CdO-SnO2 nanocomposites possess both cubic and orthorho
Pure tetragonal 10-20-nm-size zirconia-based Ni-P composite coating was developed.The physicochemical and electrochemical characteristics including corrosion resistance of the coating were investigated.The Ni-P-nano-tetragonal zirconia coating was partial
The gradient mechanical properties,variation of stress with strain and surface cracking behavior of expanded austenite developed on 316L austenitic stainless steel were investigated by nanoindentation tests,X-ray residual stress analysis and scanning elec
A facile scalable synthesis of hierarchical Sb/C micro-/nanohybrid has been addressed in this work, which possesses the advantages of both micrometer and nanometer scale structures as lithium-ion battery anode. Difunctional methacrylate monomers are used
Ternary Zn-0.5Al-0.5Mg and quaternary Zn-0.5Al-0.5Mg-xBi (x =0.1,0.3 and 0.5) alloys were studied to evaluate the thermal and structural characteristics,mechanical properties,cytotoxicity and in vitro degradation behavior.Thermal analysis and microstructu