巧取启动机前端盖轴承在修理启动机时常遇到其前端盖是盲孔，对于盲孔的前端盖更换轴承虽说方法很多（如在车床上键削、在台虎钳上凿削等），但总的来说都不很方便，弄不好还会使端盖变形，影响修理质量。笔者在修理启动机时，根据不同型号启动机前端盖轴承的内径，车制几... Qiao take the starter front cover bearing repair often encounter the front cover is a blind hole, the blind hole for the front cover to replace the bearing Although there are many ways (such as in the lathe key cut in Taiwan vise chisel cutting, etc.) But in general is not very convenient, get the cover will be deformed, affecting the quality of repair. When I repair the starter, according to different types of starter front cover bearing the inner diameter of the car a few ...