【摘 要】
：
The impact behaviour of three types of reactive powder concretes (RPC) was studied using the split Hopkinson press bar (SHPB) testing method. These RPC were prepared with steel ifber volume fraction of 0%, 3%, and 4%, respectively. The stress-strain relat
【机 构】
：
School of Civil Engineering, Guangzhou University, Guangzhou 510006, China;School of Materials Scien
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The impact behaviour of three types of reactive powder concretes (RPC) was studied using the split Hopkinson press bar (SHPB) testing method. These RPC were prepared with steel ifber volume fraction of 0%, 3%, and 4%, respectively. The stress-strain relationship, strain rate sensitivity threshold value, dynamic strength increase factor, modulus of elasticity and failure pattern of these RPC specimens subjected to impact load were investigated. From the tests, the strain rate sensitivity threshold value of 50 s-1 was obtained. The experimental results showed that when the strain rate increased from the threshold value to 95 s-1, the maximum stress of RPC increased by about 20% and the modulus of elasticity of RPC increased by about 30%. The failure pattern of RPC specimens with steel ifber reinforcement was very different from that of the RPC matrix specimen when subjected to impact loading. Under similar impact loading rate, cracks developed in the steel ifber reinforced RPC specimens, whilst the RPC matrix specimens were broken into small pieces.
其他文献
Wear resistances of CO2 corrosion product iflms formed on P110 carbon steel at different CO2 partial pressures were investigated in water sand two-phase lfow by weight loss method, and the microstructures and compositions of corrosion product iflms were a
A plasticizer triethylene glycol maleate (TEG-MA) was synthesized. The dominated monoester of moderate hydrophobicity with apparent oil-water partition coefifcient of 0.042 in the product was conifrmed by acid value determination, HPLC and FTIR. Its plast
A water-conducting polyacrylamide/montmorillonite coating was prepared by solution-blending. The coating was coated on fiber and then composited with polymer to form a composite film material that used for water saving and tree planting in arid and desert
Based on the erosion resistant coefficient, the effects of water-cement ratio, air-entrained, silica fume content and sand ratio on the sulfate attack resistance of air-entrained silica fume concrete were studied by orthogonal experiments in order to expl
Adopting a ceramic/polymer multilayer structure design to simulate the structure of nacre is usually believed to be an effective way to increase the toughness of ceramic composites at the expense of the material\'s bending strength. However, in this stu
Using the oxidation method from vanadium metal thin films by magnetron sputtering, under the fixed annealing parameters of temperature (400℃) and oxygen pressure (103 Pa), we fabricated a series of vanadium dioxide thin films through the change of anneali
To explore the effects of mechanical activation methods (ball mill, planetary mill and rod mill) on the oxidation and the spontaneous combustion of pyrite, the kinetic curves of non-activated pyrite and mechanically activated pyrite were created by simult