Internal Curing Using Water-releasing Material for High Strength Micro-expansive Concrete

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:decet
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Due to its low water content,it is difficult for expansive agent to have an effective expansive effect on high strength concrete to compensate its extensive shrinkage and form a certain expansion.To solve this problem,water-releasing material with water storage and releasing characteristics was incorporated into high strength micro-expansive concrete to provide internal curing,and expansive effect of expansive agent was improved.Migration of water from initially saturated water-releasing material to the surrounding hydrating cement paste was investigated.Based on a given efficient diffusion distance of water stored in water-releasing material,the mass and real water-cement ratio of cured cement paste were estimated.At the same time,the effect of internal curing of water-releasing material on the volume deformation of high strength micro-expansive concrete was investigated.
其他文献
Tungsten trioxide micropheres were prepared by spray pyrolysis, and tungsten carbidemicrospheres were produced by spray pyrolysis-low temperature reduction and carbonization technology.Multi-walled carbon nanotube-tungsten carbide composites were prepared
The stress distribution on the failure progress of fiber pushed-out test was studied.A numerical program,developed by meso-damage mechanics,was adopted to simulate the whole failure process of interface debonding and fiber pushing out.From the simulation,
A flame retardant (DPA-SiN) containing phosphorus, nitrogen and silicon elements was synthesized. The halogen free flame retardant was incorporated into PC/ABS to improve its flame retardancy. The flame-retardant properties of the PC/ABS/DPA-SiN blends we
Bismuth titanate (Bi_4Ti_3O_(12)) platelets were prepared by molten salt method in a new salt system of CaC_(12)-NaCl at 650-750 ℃, using bismuth nitrate pentahydrate (Bi (NO_3)_3·H_2O) and titanium butoxide (Ti (OC_4H_9)_4) as raw materials. The synthesi
Belite-rich cement(BRC)can be made at lower temperature,but it has unsatisfactory reactivity.The crystal structure of dicalcium silicate(C_2S)was modified by solutionizing some addi-tional irons.By adding barium sulfate(BaSO_4)in the raw meals,the clinker
A simple but effective doping method,immersion method,was presented.Rare earth complexes[Na_3Tb(DPA)_3·9H_2O and Na_3Eu(DPA)_3·9H_2O]were introduced into porous silicon(PS),where H_2DPA is 2,6-dicarboxy pyridine acid.Rare earths were proved to dope into P
Durability of traditional reactive powder concrete(RPC)with rich cement and high volume of fly-ash reactive powder concrete(FRPC)were studied.The X-diffraction and scanning electron microscope(SEM)measurement was imployed to analyze the microstructure.The
The influence of lightweight aggregate(LWA)pre-wetting on the chemical bound water and pore structure of the paste around aggregate as well as concrete permeability were investi-gated.The results show that,in early age the dry LWA has significant effect o