论文部分内容阅读
Chaohu Yi＇an Yunhai Technology Co., Ltd. light alloy diecasting project is completed and put into pr
【出 处】
：
中国铸造：英文版
【发表日期】
：
2017年6期
其他文献
In the present research, the Sb-alloying method was adopted, and the grain re finement and tensile properties of as-cast Mg-10Zn-5Al alloys with varying Sb addi
期刊
The interfacial heat-transfer coefficient at casting/mould interface is a key factor that impacts the simulation accuracy of solidification progress.At present,
Predicting model on ultimate compressive strength of Al2O3-ZrO2 ceramic foam filter based on BP neur
在现在的学习， BP 神经网络模型为陶器的泡沫过滤器准备了由的 Al2O3-ZrO2 的最终的压缩力量的预言被建议离心滑动 BP 神经网络模型的 casting.The 输入是发泡的聚苯乙烯模板(
To obtain the semi-solid slurry with uniform and fine structure morphology that satisfies the requirement of rheocasting process, a new process for preparing se
Lost foam casting(LFC)technology has been widely applied to cast iron and cast steel.However,the development of LFC for Al and Mg alloys was relatively slower t
期刊
Magnesium alloys are well known for their excellent properties, but the potential issues with oxidation and burning during melting and casting largely limit its
期刊
To study the curing mechanism of alkaline phenolic resin with organic ester, three esters were chosen to react with three systems — alkaline phenolic resin, po
期刊
High Cr white cast iron/carbon steel bimetal liner by lost foam casting with liquid-liquid composite
Liners in wet ball mill for mineral processing industry must bear abrasive wear and corrosive wear, and consequently,the service life of the liner made from tra
期刊
汽轮机片是飞机引擎的批评部件之一。引擎的表演取决于材料不能是的部件，而是 superalloy 片的形状和尺寸容易 machined.Although 投资扔是为如此的网形状部件的一个理想的过
Orthogonal tests of copper-clad aluminum bimetal continuous casting by nitrogen pressure core-fillin
To provide theoretical basis and practical guidance for preparing composite rods by direct continuous casting, copper-clad aluminum composite rods of external c
期刊