LOCA整体试验进展

来源 :中国原子能科学研究院年报 | 被引量 : 0次 | 上传用户:yatou5004
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
燃料元件是反应堆的核心部件,对反应堆安全稳定运行非常重要,由于运行条件的苛刻,燃料元件包壳的材料性能在运行过程中降低,当发生LOCA时,高温氧化和吸氢脆化使得包壳的完整性受到严峻的考验。“失水情况下国产新锆合金安全性能研究”课题的研究目标是获得LOCA工况下国产新锆合金高温氧化、鼓胀和爆破的相关性能试验数据,评价现行LOCA准则的适用性,为 The fuel element is the core component of the reactor and is very important to the safe and stable operation of the reactor. Due to the harsh operating conditions, the material properties of the fuel element cladding decrease during operation. In the case of LOCA, high temperature oxidation and hydrogen embrittlement cause the cladding The integrity of the subject is harsh test. “Research on the Safety Performance of Domestic New Zirconium Alloy Under Water Loss” The research goal of the subject is to obtain the relevant performance test data of high temperature oxidation, bulging and blasting of the domestic new zirconium alloy under LOCA condition, and to evaluate the applicability of the current LOCA criterion as
其他文献
入口腔室的结构设计和流量分配分析是钠冷快堆蒸汽发生器设计中的重要部分,入口腔室设计是否合理直接关系到蒸汽发生器的运行安全与可靠性。本文以CEFR蒸发器钠侧入口腔室的
NaI(Tl)whole body counter was independently developed in China Institute of Atomic Energy in 1978,which was used for directly measuringγradioactive nuclide con
The emittance is one of the important parameters to measure the beam current quality.In the beam transport system,the quick and accurate determination of the be
业余球友尽量避免鱼跃能不能教下我如何鱼跃还不受伤哦?(Lucky-lee木子)我觉得这个只可身教不可言传,更不可意会,因为每个人鱼跃的动作都不是一样的,要根据自己的习惯和身体
为计算中国先进研究堆(CARR)中子织构谱仪的分辨率和极图窗,依据倒易空间衍射几何的误差原理,分析推导了谱仪分辨率和极图窗的计算公式。将CARR中子织构谱仪的实际参数带入公
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.
Microwave system is one of main subsystems of 10 MeV/20kW electron irradiating linac.It provides accelerating tube with microwave power,and accelerates electron
The soil sample is a very complicated system in environment.There are many interference factors in the determination of the content of uranium.Laser fluorescenc
对专用X80钢母材、焊缝及X02/X80热影响区材料在试验堆内进行了辐照,评价特种环境下专用材料的力学性能。辐照累计中子注量(E>1MeV)达到4×10~(16)cm~(-2),辐照温度不高于40
核临界安全一直是后处理厂重点关注的问题之一。溶解器是其中的关键设备,属于固液多相混合非均匀系统,影响其临界安全的因素很多,其中一个关键参数是温度系数。本实验在非均