【摘 要】
:
Ti-23Nb-0.7Ta-2Zr-O gum metal (GM) is an attractive candidate material for applications that require superior mechanical properties.In our earlier investigation
【机 构】
:
Nano and Heterogeneous Materials Center,School of Materials Science and Engineering,Nanjing Universi
论文部分内容阅读
Ti-23Nb-0.7Ta-2Zr-O gum metal (GM) is an attractive candidate material for applications that require superior mechanical properties.In our earlier investigation of the GM[1],geometrical softening and the generation of adiabatic shear bands (ASBs) were proposed as primary reasons for the documented anisotropic impact response.In the present study,electron backscattered diffraction (EBSD) analysis reveals two different deformed microstructures,i.e.,deformed ultrafine grains (UFGs) and dynamically recrystallized UFGs,formed in the ASBs of GM samples processed by extrusion equal channel angular pressing (ECAP),respectively.Additional calculation of temperature rise during dynamic compression suggests that the above microstructure differences in the ASBs was originated from their different max-imum ASB temperatures (608 K for extruded GM and 1159 K for ECAP-processed GM).Moreover,our calculation on the temperature at the onset of ASBs indicates that microstructural softening is the primary cause for the development of ASBs in both extruded GM (321 K) and ECAP-processed GM (331 K).
其他文献
The interplay and intergrowth characteristic of faceted intermetallic compounds (IMCs) during solid-ification was originally investigated through the rod-like A
The inherent drawbacks of selective laser melting technique including serious micro-pore and element microsegregation problems destroy the mechanical property o
Rational design has been widely used to develop high-performance metal selenides-based electrode materials for supercapacitors.In this study,we develop a facile
Antimony (Sb) nanoparticles (SbNP) encapsulated in multiwalled carbon nanotubes (MWCNTs) matrix has been fabricated by a facile two-step ball milling strategy,i
Realizing improved strength in composite metallic materials remains a challenge using conventional welding and joining systems due to the generation and develop
Various high entropy alloys (HEAs) with improved mechanical properties were developed by reducing the phase stability and then promote the phase transformation.
Twin-twin intersections are often observed in face-centered cubic (FCC) metallic nanostructures,which have important contributions to the plastic deformation an
Sulfate-reducing bacteria (SRB) has been pointed out as one of the causative agents of microbial induced corrosion in the marine environment.To address this pro
The formation of shear bands in metallic glasses (MGs) was examined by tailoring localized complex stress fields (LCSFs).The findings have shown that the LCSFs
Effective oil-water separation is a continuous pursuit,not only for scientific research but also for engi-neering application,because oil spills are causing the