可调前角、刃倾角外圆车刀,可以通过调节获得不同的前角和相应的刃倾角,再刃磨出合适的主偏角(75°～90°)、后角等角度、选择所需牌号刀片,对多种金属材料进行切削加工,提高切削效率和加工质量。结构及工作原理: 刀具结构如图1所示。在刀体10上铣一条宽10毫来、夹角55°、轴向前角25°、刃倾角-4°的通槽。槽后部攻M8螺孔,配圆头调节螺钉2顶在刀垫3底面的圆坑内,随着螺钉2的升降,被顶着的刀垫3、 Adjustable rake, cutting edge angle turning tool, you can get through the regulation of different rake angle and the corresponding edge angle, and then grinding out of the appropriate primary angle (75 ° ~ 90 °), angle after the angle, Need brand blade, cutting a variety of metal materials, improve cutting efficiency and processing quality. Structure and working principle: Tool structure shown in Figure 1. In the cutter body 10 milling a width of 10 millimeters, the included angle of 55 °, the axial rake angle of 25 °, the rake angle -4 ° slot. M8 slot after the groove attack, with the round head adjustment screw 2 at the bottom of the pad 3 in the pit, with the screw 2 is up and down, was hit the pad 3,