论文部分内容阅读
The combined microarc oxidation(MAO) and magnetron sputtering deposition process was used to deposit duplex a-C:H/MAO and Ti-a-C:H/MAO coatings on AM80 magnesium alloy. The microstructure, mechanical properties and tribological behavior of the two duplex coatings were investigated. The experimental results showed that the a-C:H and Ti-a-C:H top films on Si substrates were dense and had a low G peak position and ID/IG ratio, compared with the hydrogen-free amorphous carbon films. Numerous micropores were found on the duplex a-C:H/MAO and Ti-a-C:H/MAO coatings together with low values of hardness(H) and elastic modulus(E), which also showed good binding strength with the Mg alloy substrates. Compared to MAO treated substrate used for the protection of the Mg alloy, the duplex a-C:H/MAO and Ti-aC:H/MAO coatings still had stable and low value of friction coefficient, even though the surface of the duplex coatings was rough and porous. Furthermore, the mechanism of friction reduction of the two duplex coatings on the Mg alloy substrates was discussed.
The combined microarc oxidation (MAO) and magnetron sputtering deposition process was used to deposit duplex aC: H / MAO and Ti-aC: H / MAO coatings on AM80 magnesium alloy. The microstructure, mechanical properties and tribological behavior of the two duplex coatings were investigated. The experimental results showed that the aC: H and Ti-aC: H top films on Si substrates were dense and had a low G peak position and ID / IG ratio, compared with the hydrogen-free amorphous carbon films. Numerous micropores were Compared to the low modulus of hardness (H) and elastic modulus (E), which also showed good binding strength with the Mg alloy substrates. Compared to MAO treated substrate used for the protection of the Mg alloy, the duplex aC: H / MAO and Ti-aC: H / MAO coatings still had stable and low value of the friction coefficient, even though the surface of the duplex coatings was rough and porous. , the mechanism of friction reduction of the two duplex coatings on the Mg alloy substrates was discussed.