“机械设备介质泄漏的动态处理方法”是指机械设备在运行状态下消除介质泄漏的一种应急技术手段,具有很高的实用价值。根据机械设备内介质的物化性质、压力、温度及损坏泄漏部位的不同,可采用以下方法处理。 一、设备内介质压力≤0.1MPa、温度≤200℃条件下各种机动车上的油箱、水箱、变压器、民用煤气柜及管道等的泄漏可选择修补剂堵塞粘接法。根据机械设备坏损部位情况选择相应的修补剂品种,清理坏损部位上除泄漏介质外的一切污物及铁锈,最好露出金属本体或物体本色,这样有利于修补剂与坏损本体形成良好的填塞效应及产生平衡相,按修补剂使用说明调配好修补剂,在修补剂的最佳状态下,迅速压在泄漏缺陷部位上,待修补剂充分固化后,再撤出外力。泄漏停止后,对泄漏缺陷周围按粘接技术要求二次清理并修整圆滑,再在其上用结构胶粘剂及玻璃布进行粘接补强,以保证新的密封结构有较长的使用寿命。当泄漏介质对人体有伤害或在人手难以接触到的部位,可制作专用的顶压工具,将调配好的修补剂放在顶压工具的凹槽内,压向泄漏缺陷部位,待 “Dynamic Disposal of Mechanical Equipment Medium Leakage” refers to the mechanical equipment in operation to eliminate media leakage an emergency technical means, with high practical value. According to the physical and chemical properties of machinery and equipment within the media, pressure, temperature and damage to the different parts of the leak, the following methods can be used to deal with. First, the device medium pressure ≤ 0.1MPa, temperature ≤ 200 ℃ conditions on a variety of vehicles on the tank, water tanks, transformers, civil gas cabinets and pipes, and other leaks can choose to plug the adhesive repair method. According to the situation of mechanical equipment damaged parts choose the appropriate repair varieties, clean up the damaged parts of all the media in addition to leakage of dirt and rust, it is best to reveal the metal body or object character, which is conducive to the repair agent and the formation of a good body Of the packing effect and produce a balanced phase, according to the instructions for the deployment of repair agent repair agent in the best state of repair agent, the rapid pressure leak in the defect site until the repair agent fully cured, and then withdraw the external force. After the leakage is stopped, the leak around the defects by adhesive technology secondary cleaning and finishing smooth, and then use the structural adhesive and glass cloth bonding reinforcement to ensure that the new seal structure has a longer service life. When the leakage medium on the human body is harmed or hard to reach parts of the human can make a special top pressure tools, the deployment of good repair agent placed in the groove of the top pressure tools, pressure leaks to the defect site until