木模板对拉螺杆孔的制作传统施工多为操作工人在施工现场作业面用电钻随意进行钻设,由于受钻设设备、角度、力度等主观因素的影响,致使钻孔直径、形状及位置不标准、不规范、不统一,容易造成螺杆孔四周模板出现劈裂现象,导致混凝土构件成型尺寸不准、观感质量差,甚至造成涨模或漏浆现象,而且采用传统方法钻设时一次只能对一块模板进行操作,施工效率低。笔者制作了一种模板输送装置配合摇臂钻对模板对拉螺杆孔集中进行钻 Wood template for the production of the screw hole Traditionally, construction workers at the construction site for the construction of the work surface with the drill drilled at random, due to drilling equipment, angle, force and other subjective factors, resulting in the drilling diameter, shape and location of Standard, non-standard, not uniform, easy to cause the screw hole around the template splitting phenomenon, resulting in the molding of concrete components are not allowed to size, perception of poor quality, and even caused by the phenomenon of up or leakage phenomenon, and the use of traditional methods once drilling only The operation of a template, the construction of low efficiency. I made a template delivery device with rocker drill on the template to pull the screw hole focus on drilling