论文部分内容阅读
国营东北制药厂安瓿车间检查室一毫升检查小组,过去用老方法检查安瓿制剂,是用右手从筐裹取出安瓿摇一下,放在灯下,再用右手交给左手,先检查封口部有无炭化和封口不严现象,然后用手拿安瓿的头部,将安瓿倒过来检查安瓿有无裂纹,同时眼睛注意瓿颈有无玻璃流下,再慢慢的摇两下,转一下,看药液中有无点毛玻璃等。其主要缺点是只能看安瓿一端,不能两头检查,因此就不易检查出药液中的大东西;同时,一支手只能取5支,产量也低。当时总厂领导上巳派技术人员到山东新华药厂去学习“检查安瓿”的工作方法,回来后立即推广。当新华药厂的先进工作方法推行到车间之后,开始时有的工人们感到不顺手,也有些返工品。有的工人说:“这玩意儿不对劲呀”
State Pharmaceutical Factory Northeastern Pharmaceutical ampoule inspection room 1 ml inspection team, the past, the old way to check the ampoule preparation is to use the right hand to take out the ampoule from the basket shake it, put the lamp, and then the right hand to the left hand, first check the sealing part Carbonization and lax sealing phenomenon, and then take the ampoule by hand in the head, the ampoule upside down to check for cracks, while paying attention to whether the eye of the glass ampoule flow down, then slowly shake it twice, look at the liquid There is no point in the frosted glass. The main disadvantage is that only one end of the ampoule can not be inspected, so it is not easy to check out large items in the medicinal solution. In the meantime, one hand can only take 5 pieces and the yield is also low. At that time, the plant leader sent a technical staff to Shandong Xinhua pharmaceutical factory to learn “check the ampoule ” working methods, immediately back after the promotion. When the advanced working methods of Xinhua Pharmaceutical Factory were introduced to the workshop, some workers at the beginning felt uncomfortable and some reworked. Some workers said: “This thing is wrong ah ”