论文部分内容阅读
型板1固定在型板框2内,并且在型板框2内被造型机送到型板更换工位3,(部分)型板的取下与安装都力图按照预先制定的程序进行,型板可以自动夹紧,可以由料箱被输送到更换工位并且可以返回。建议升降缸5固定在支架4上,带有垂直分离缸7的升降框6装在升降缸5的活塞杆上。此外在栅格上有一定数量的穿孔(最好是4个),穿孔的数目和栅格尺寸要与分离缸7的布置相适应。按图b所示,分离缸7的活塞杆9的顶端通过滚子10作用到型板框2的紧固杠杆12上,紧固杠杆12是由弹簧11加压的,而型板1具有紧固件13,13与紧固杠杆顶端14配合进行紧固。
Form 1 is fixed in the formwork frame 2, and in the formwork frame 2 by the molding machine sent to the formwork change station 3, (part) pattern board removal and installation are trying to follow the pre-established program, type The plate can be automatically clamped, can be transported from the magazine to the change station and can be returned. It is suggested that the lifting cylinder 5 be fixed on the support 4, and the lifting frame 6 with the vertical separation cylinder 7 is installed on the piston rod of the lifting cylinder 5. In addition there are a number of perforations (preferably four) on the grid, the number of perforations and the size of the grid being adapted to the arrangement of the separating cylinders 7. As shown in Fig. B, the top end of the piston rod 9 of the separating cylinder 7 acts on the tightening lever 12 of the formwork frame 2 by the roller 10, the tightening lever 12 is pressurized by the spring 11, and the plate 1 has a tight The fasteners 13, 13 cooperate with the fastening lever tip 14 for fastening.