La_2Zr_2O_7 thermal barrier coatings(TBCs) with dispersed Pt particles were prepared by cathode plasma electrolytic deposition(CPED) with ceramic balls added to the cathode region. Compared with the conventional CPED, when ceramic balls are used in the cathode region, the plasma discharge ignition current density decreases approximately 62-fold and the stable plasma discharges occur at the whole cathode surface. Such TBCs with a thickness of 100 μm exhibit a crack-free surface and are composed of pyrochlore-structured La_2Zr_2O_7. Cyclic oxidation, scratching, and thermal insulation capability tests show that such TBCs not only exhibit high resistance to oxidation and spallation but also provide good thermal insulation. These beneficial effects are attributed to the excellent properties of TBCs, such as good thermal insulation because of low thermal conductivity, high-temperature oxidation resistance because of low-oxygen diffusion rate, and good mechanical properties because of the toughening effect of Pt particles. Compared with the conventional CPED, when ceramic balls are used in the cathode region, the plasma discharge ignition (TBCs) Such TBCs with a thickness of 100 μm exhibit a crack-free surface and are composed of pyrochlore-structured La_2Zr_2O_7. Cyclic oxidation, scratching, and thermal insulation capability tests show that such TBCs not only exhibit high resistance to oxidation and spallation but also provide good thermal insulation. also as provide good properties of TBCs, such as good thermal insulation because of low thermal conductivity, high-temperature oxidation resistance because of low-oxygen diffusion rate, and good mechanical properties because of the t oughening effect of Pt particles.